Liquid Membrane - Nippon.Technology

Перейти к контенту

Главное меню:

Liquid Membrane

 
 
 
 
 
 
 
 
 
 
Dewatering Polymer Composition

Liquid Membrane 3 in 1
リキッドメンブレン
Жидкая Мембрана 3 in 1

“Liquid Membrane 3 in 1” is the Dewatering Polymer Composition, specially designed to strengthen, dedusting and waterproofing of floors and walls before laying the ceramic tile or plastering of a wet areas. This composition is also used for waterproofing of bathrooms, before laying of tile on walls. It can be used while constructing swimming pools or baths and in a projects of bathrooms or toilets. This polymer composition is well proves itself when waterproofing of cellars and ground floors of buildings and when creating of a slam geomembranes.

“Liquid Membrane 3 in 1” contains primer (№1 that greatly increases the strength of fixing of tiles or plaster) and safe for human complex of herbicides (№2 that destroys fungus and molds in a bathroom). The polymer composition creates an elastic waterproof membrane (№3 that prevents the penetration of moisture in a floor and room walls or in a walls of a pool). A ceramic tile will not be cracked under of building structure deformations.

“Liquid Membrane 3 in 1” is a complete solution when installing of ceramic tiles both on dry and clean and on wet and dirty surfaces in a projects of bathrooms, kitchens and toilets projects. The composition is characterizes by good adhesion and high capillarity; it penetrates deeply into the pores and provides a flexible coating on the surface. The polymer composition can be used for basements waterproofing and the waterproofing of bathrooms. The formulation of the composition includes the primer which provides an excellent adhesion of the coating to various wall materials such as brick, concrete, gypsum cardboard and wood. Ceramic tiles in a bathroom will not be fall off.

“Liquid Membrane 3 in 1” penetrates deeply into the cracks; it can be applied equally well both on dry and clean, and on wet or dirty surfaces, because it consists a special dewatering additive. This additive removes water when a waterproofing of various construction materials
surfaces is carrying out. Water is collected in balls as if it is mercury, without disturbing the treatment process. If necessary it is allowed to operate under the water layer. This composition can be effectively used for the construction and waterproofing of swimming pools, or for fixing of tiles on the outdoor terrace, balcony waterproofing and while repairing of a garage.

“Liquid Membrane 3 in 1” prevents the loss of moisture during the solidification of an adhesive solution, that improves the reliability of tiles fixing to a dry concrete or brick walls; for example in the projects of kitchens. The polymeric composition possesses the ability to penetrate into the structure of cement based tile adhesive that enhances its durability and frost resistance. This technological process is called "wet to wet operation" because the ceramic tile grout is applied directly to the wet composition layer.

“Liquid Membrane 3 in 1” contains an antiseptic and a complex of 3 safe for human herbicides. This product destroys all kinds of fungus and a mold but not only some varieties of it. The long acting agent will help to get rid of mold in the bathroom, and during the construction of a bath.

“Liquid Membrane 3 in 1” can be applied at temperatures up to - 15 C; in this case the surface should be free from ice or mud. The ice must be removed, because it cannot be impregnated that reduces the protection of concrete from moisture. The elastic composition based on polymers has high plasticity and frost resistance that help to prevent the membrane damage in the frost and under a deformation of building constructions.

“Liquid Membrane 3 in 1” is the ability to buy the antiseptic, the primer, the fungicide and the waterproofing material simultaneously. The composition is applied on a wet surface, displacing the water and uniformly fills all cracks, cavities and damages. Quick repair is possible even in the rain and snow; now you can work in any weather.

Features and Benefits:
- The composition forms the elastic polymer membrane on the surface that prevents the penetration of moisture in a floor and room walls. A ceramic tile will not be cracked under of building structure deformations.
- Elastic polymer composition will not be damaged from the cold and during the seasonal deformations of building constructions.
- No need to waste time and money for drying and/or cleaning concrete or brick walls. Good application on dry and clean and on wet and dusty surfaces.
- The composition is applied on a wet surface, displacing the water and uniformly fills all cracks, cavities and damages. No need to wait for a suitable weather.
- Good adhesion to a brick, wooden and concrete surfaces. The composition contains primer that greatly increases the strength of fixing of tiles or plaster. Ceramic tiles will not be fall off.
- It has a high capillarity, penetrates deeply into the cracks, cavities, damages and impregnates pores; that blocks access of moisture and oxygen and protects from rotting.
- Penetrate into the structure of cement based tile adhesive that enhances its durability and frost resistance.
- Prevents the loss of moisture during the solidification of an adhesive solution that improves the reliability of tiles fixing to a dry concrete or brick walls.
- Contains an antiseptic and a complex of 3 safe for human herbicides. This product destroys all kinds of fungus and a mold but not only some varieties of it.
- The long acting agent will help to get rid of mold in the bathroom.
- Suitable for indoor and outdoor applications. The composition is possible to apply to the concrete or wooden surfaces at subzero temperatures (up to -15C).
- A single component composition is easy to use. Just open, mix and paint.

Fields of application:

- Waterproofing under the ceramic tile.
- Waterproofing of the floor.
- Waterproofing and primer under the plaster.
- Prevention of groundwater inflow.
- Waterproofing of a basement, a ground floor or a cellar.
- Reliable laying of tiles on a very dry monolithic concrete.
- Construction of a pool, swimming pools waterproofing.
- Construction of the bathhouses and sauna buildings.
- Waterproofing of a bathroom.
- The adhesive primer and waterproofing before laying tiles or natural stone.
- Waterproofing of the foam blocks constructions.
• The color of composition: Black.
• Climatic belts of application: All.
• Applied by brush or by spraying.
• Forms of packaging: bucket (20 kg.), can (2.4 kg), aerosol can 1000ml (750ml filling).

© Dmitry Nippon, St. Petersburg, Russia.
 
 
 
 
 
 
Назад к содержимому | Назад к главному меню